Slant_fin EC-10 Assembly Instructions Bedienungsanleitung PDF herunterladen (Seite 4)

4.2

4.3

8575N018

8575N019

Loosen the 2 top and bottom nuts.

Remove the lower and upper hinges.

8575N020

- Remove the cast iron hinge pin for the burner door

fixed by the 2 screws . Put the two screws back

on the right-hand side

- Reinstall the cast iron hinge pin for the burner door

on the left side using the 2 screws .

Reverse the direction of opening of the burner door if necessary

(opening at left).

- Reinstall the hinge pins on the left side, fixing them

using the nuts located on the burner door hinge pins, on

the left side, as shown on the adjacent figure.

- Tighten the 2 nuts .

4.1

When the burner leaves the factory, the burner

door opens towards the right. Perform operations

4.1, 4.2 and 4.3 below to open the burner door

towards the left (if absolutely necessary).

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Slant_fin EC-10 Assembly Instructions Bedienungsanleitung Seite 4